Please follow the steps below to complete your installation of NETePay EVO US EMV (FD-RC) Host - RRH 5.06.14 Rental

Step 1 - Install Client Control

In order to communicate with this NETePay your POS may use one of the following ActiveX controls depending on the integration method chosen by the POS developer. If you are unsure of which to install please contact POS technical support.

dsiEMVUS® 1.73
Download

Release date: 10/16/2023

Datacap’s out-of-scope ActiveX control for NETePay supporting a variety of EMV-enabled hardware options.

For information on supported devices please see our Compatible devices page.

Release notes for v1.73

  • A new XML tag is supported to modify the Ingenico contactless delay. This new tag must be sent as part of an EMVParamDownload. The tag is <ContactlessDelay>. Valid values are 7-25. The value is tenths of a second. The default is 7 for .7 seconds. We’ve been told that a value of 17 helps the Lane/7000 from reading contactless when it should not.
  • For Pax, GetSignature values for <SignMaximumX> and <SignMaximumY> are corrected. Also, the points are relative to the upper left corner (0,0).
  • For Pax IM30, if the CVM Support setting from NETePay (or Hosted Bridge) is set to None, dsiEMVUS will use the ICS configuration for an attended device with No CVM. This will cause the IM30 not to prompt for a PIN. EMV Support should be set to Credit Only. The Terminal Type value included in EMV transactions will have a value of 25 for an attended device.
  • For the IDTech VP6800, the EMV configuration is typically 3C which includes support for CVM PIN and None. If the CVM Support setting from NETePay (or Hosted Bridge) is set to None, dsiEMVUS will use the ICS configuration 4C where the CVM setting is None. This will cause the VP6800 not to prompt for a PIN. EMV Support should be set to Credit Only.
  • For PAX devices, sending a Cancel from the POS at the TIP prompt now correctly cancels the transaction.
Microsoft Windows 11 Pro / 10 Pro / Server 2019 / Server 2016

OR

dsiPDCX® 1.89
Download

Release date: 06/21/2023

Datacap’s out-of-scope ActiveX control for NETePay and GIFTePay software that supports dozens of plug and play hardware options, including PIN Pads, Mag stripe readers, all-in-one touch terminals and contactless readers.

Release notes for v1.89

  • Support is added for the Ingenico Lane/3600 device for Datacap Hosted.
  • Support is added for PAX devices with Bluefin validated E2E. This includes 6 models.
  • For PAX devices, a new XML tag is added so that an ISV can specify the PAX forms package to be used for any transaction or TranCode that uses a PAX device.
  • For the latest PAX forms package, the STR.AMOUNT_TEXT variable is cleared when displaying the "swipe screen".
Microsoft Windows 11 Pro / 10 Pro / Server 2019 / Server 2016

OR

DSIClientX® 3.86
Download

Release date: 09/01/2011

Datacap’s long-standing in-scope ActiveX control for NETePay and GIFTePay software.

Microsoft Windows 11 Pro / 10 Pro / Server 2019 / Server 2016
Step 2 - Install NETePay EVO US EMV (FD-RC) Host - RRH 5.06.14 Rental
Download User Guide

Release date: 02/03/2017

Support added for...

  • Alphanumeric Terminal IDs.
  • Batch Summary and Batch Close if the merchant account uses Buypass on the backend.
  • FSA transactions.
  • EBT EWIC transactions. The dsiPDCX interface specification is currently being revised to include EWIC transactions.
  • TDES DUKPT P2PE using Ingenico Telium 2 devices.The following Ingenico devices are supported by the current version of dsiPDCX 1.46 with TDES DUKPT for First Data.
    • iSC250
    • iPP320
    • iPP350
    • iCMP
    • iSC480
  • New build released 2/9/17
    • Correction to MasterCard reversal formatting
  • New build released 2/28/17
    • Allow AVS data on SaleByRecordNo
    • Map tax amount of 0.00 to NoTax
    • Response code 785 treated as approval on ZeroAuth/EMVZeroAuth
Microsoft Windows 11 Pro / 10 Pro / Server 2019 / Server 2016