Please follow the steps below to complete your installation of NETePay Worldpay IP (Mercury) US EMV + Debit - MPH 5.07.20

Step 1 - Install Client Control

In order to communicate with this NETePay your POS may use one of the following ActiveX controls depending on the integration method chosen by the POS developer. If you are unsure of which to install please contact POS technical support.

dsiEMVUS® 1.66
Download

Release date: 11/14/2022

Datacap’s out-of-scope ActiveX control for NETePay supporting a variety of EMV-enabled hardware options.

For information on supported devices please see our Compatible devices page.

Release notes for v1.66

  • Support is added for the PAX A35. Also, the PAX IM30 for EVO is released now that we have a full certification for this unattended device. New SecureDevice values listed below...
    • EMV_A35_PAYMENTECH
    • EMV_A35_VANTIV_E2E
    • EMV_A35_TSYS
    • EMV_A35_TSYS_VOLT
    • EMV_A35_RAPIDCONNECT
    • EMV_A35_RAPIDCONNECT_E2E
    • EMV_A35_HEARTLAND
    • EMV_A35_DATACAP_E2E
    • EMV_A35_EVO
    • EMV_IM30_EVO
  • For Ingenico devices, the left 4 characters of the kernel version is now checked rather than the entire kernel version field returned in the 07. command response.
  • Previously, the IDTech VP6800 would quickly flash “Canceled” during a PadReset. This message has been removed.
  • This version of dsiEMVUS allows the new VoidByInvoiceNo transaction to be passed through to NETePay. The VoidByInvoiceNo trancode does not collect card data.
  • The IDTech VP3300 whitelist is now enabled during the end of an EMVParamDownload. It is expected that an ISV will perform an EMVParamDownload rather than a dsiPDCX SecureDeviceInit which also loads the whitelist for the VP3300.
Microsoft Windows 10 Pro / 8 Pro / 7 Pro / Vista Pro / XP Pro

OR

dsiPDCX® 1.85
Download

Release date: 11/14/2022

Datacap’s out-of-scope ActiveX control for NETePay and GIFTePay software that supports dozens of plug and play hardware options, including PIN Pads, Mag stripe readers, all-in-one touch terminals and contactless readers.

Release notes for v1.85

  • Support is added for the PAX A35. Also, the PAX IM30 for EVO is released now that we have a full certification for this unattended device. New SecureDevice values listed below...
    • PAXA35
    • PAXA35_DATACAP_E2E
    • PAXA35_VANTIV_E2E
    • PAXA35_EVO_E2E
    • PAXA35_RAPIDCONNECT_E2E
    • PAXA35_TSYS_VOLT
    • PAXA35_HEARTLAND_VOLT
    • PAXIM30_EVO_E2E
  • This version of dsiEMVUS allows the new VoidByInvoiceNo transaction to be passed through to NETePay. The VoidByInvoiceNo trancode does not collect card data.
Microsoft Windows 10 Pro / 8 Pro / 7 Pro / Vista Pro / XP Pro

OR

DSIClientX® 3.86
Download

Release date: 09/01/2011

Datacap’s long-standing in-scope ActiveX control for NETePay and GIFTePay software.

Microsoft Windows 10 Pro / 8 Pro / 7 Pro / Vista Pro / XP Pro
Step 2 - Install Administrative tools (optional)
Local Batch Report Viewer
Download User Guide

Release date: 05/11/2020

Local Batch Report Viewer can be used to view the locally stored batch report of Host based NETePay who support support this feature and have it enabled via PSCS.

Release notes for v1.03

  • Fix for an issue which prevented errors from the open batch being shown in the decline/error tab.
Microsoft Windows 10 Pro / 8 Pro / 7 Pro / Vista Pro / XP Pro
Step 3 - Install NETePay Worldpay IP (Mercury) US EMV + Debit - MPH 5.07.20
Download User Guide

Release date: 10/23/2017

  • PA-DSS 3.2
  • EMV Debit support is added for the following AIDs
    • A0000000033010 - Visa Interlink
    • A0000000980840 - Visa US Common Debit
    • A0000000042203 - US Maestro
    • A0000000043060 - Maestro
    • A0000001524010 - Discover US Common Debit
  • eWIC support is included in this version. This is an optional feature that must be enabled via PSCS and requires integration changes.
  • Store and Forward is added. This is an optional feature that must be enabled via PSCS and requires integration changes.
  • Pay At The Table is added. This is an optional feature that must be enabled via PSCS and requires integration changes.
  • Local Batch Reporting data storage is added. This is an optional feature that must be enabled via PSCS. Data can be viewed using the Local Batch Report Viewer.
  • Suport for Auto-Updates.
Microsoft Windows 10 Pro / 8 Pro / 7 Pro (Windows XP and Vista do not support TLS 1.2 which is now an industry requirement)