Software Downloads

Datacap’s out-of-scope ActiveX control for NETePay supporting a variety of EMV-enabled hardware options.

For information on supported devices please see our Compatible devices page.

Release notes for v1.73

• A new XML tag is supported to modify the Ingenico contactless delay. This new tag must be sent as part of an EMVParamDownload. The tag is <ContactlessDelay>. Valid values are 7-25. The value is tenths of a second. The default is 7 for .7 seconds. We’ve been told that a value of 17 helps the Lane/7000 from reading contactless when it should not.
• For Pax, GetSignature values for <SignMaximumX> and <SignMaximumY> are corrected. Also, the points are relative to the upper left corner (0,0).
• For Pax IM30, if the CVM Support setting from NETePay (or Hosted Bridge) is set to None, dsiEMVUS will use the ICS configuration for an attended device with No CVM. This will cause the IM30 not to prompt for a PIN. EMV Support should be set to Credit Only. The Terminal Type value included in EMV transactions will have a value of 25 for an attended device.
• For the IDTech VP6800, the EMV configuration is typically 3C which includes support for CVM PIN and None. If the CVM Support setting from NETePay (or Hosted Bridge) is set to None, dsiEMVUS will use the ICS configuration 4C where the CVM setting is None. This will cause the VP6800 not to prompt for a PIN. EMV Support should be set to Credit Only.
• For PAX devices, sending a Cancel from the POS at the TIP prompt now correctly cancels the transaction.

Datacap’s out-of-scope ActiveX control for NETePay and GIFTePay software that supports dozens of plug and play hardware options, including PIN Pads, Mag stripe readers, all-in-one touch terminals and contactless readers.

Release notes for v1.89

• Support is added for the Ingenico Lane/3600 device for Datacap Hosted.
• Support is added for PAX devices with Bluefin validated E2E. This includes 6 models.
• For PAX devices, a new XML tag is added so that an ISV can specify the PAX forms package to be used for any transaction or TranCode that uses a PAX device.
• For the latest PAX forms package, the STR.AMOUNT_TEXT variable is cleared when displaying the "swipe screen".

Datacap’s long-standing in-scope ActiveX control for NETePay and GIFTePay software.

Local Batch Report Viewer can be used to view the locally stored batch report of Host based NETePay who support support this feature and have it enabled via PSCS.

Release notes for v1.03

• Fix for an issue which prevented errors from the open batch being shown in the decline/error tab.