Please follow the steps below to complete your installation of NETePay EVO US EMV (FD-RC) Host - RRH 5.07.35 Rental

Step 1 - Install Client Control

In order to communicate with this NETePay your POS may use one of the following ActiveX controls depending on the integration method chosen by the POS developer. If you are unsure of which to install please contact POS technical support.

dsiEMVUS® 1.73
Download

Release date: 10/16/2023

Datacap’s out-of-scope ActiveX control for NETePay supporting a variety of EMV-enabled hardware options.

For information on supported devices please see our Compatible devices page.

Release notes for v1.73

  • A new XML tag is supported to modify the Ingenico contactless delay. This new tag must be sent as part of an EMVParamDownload. The tag is <ContactlessDelay>. Valid values are 7-25. The value is tenths of a second. The default is 7 for .7 seconds. We’ve been told that a value of 17 helps the Lane/7000 from reading contactless when it should not.
  • For Pax, GetSignature values for <SignMaximumX> and <SignMaximumY> are corrected. Also, the points are relative to the upper left corner (0,0).
  • For Pax IM30, if the CVM Support setting from NETePay (or Hosted Bridge) is set to None, dsiEMVUS will use the ICS configuration for an attended device with No CVM. This will cause the IM30 not to prompt for a PIN. EMV Support should be set to Credit Only. The Terminal Type value included in EMV transactions will have a value of 25 for an attended device.
  • For the IDTech VP6800, the EMV configuration is typically 3C which includes support for CVM PIN and None. If the CVM Support setting from NETePay (or Hosted Bridge) is set to None, dsiEMVUS will use the ICS configuration 4C where the CVM setting is None. This will cause the VP6800 not to prompt for a PIN. EMV Support should be set to Credit Only.
  • For PAX devices, sending a Cancel from the POS at the TIP prompt now correctly cancels the transaction.
Microsoft Windows 11 Pro / 10 Pro / Server 2019 / Server 2016

OR

dsiPDCX® 1.89
Download

Release date: 06/21/2023

Datacap’s out-of-scope ActiveX control for NETePay and GIFTePay software that supports dozens of plug and play hardware options, including PIN Pads, Mag stripe readers, all-in-one touch terminals and contactless readers.

Release notes for v1.89

  • Support is added for the Ingenico Lane/3600 device for Datacap Hosted.
  • Support is added for PAX devices with Bluefin validated E2E. This includes 6 models.
  • For PAX devices, a new XML tag is added so that an ISV can specify the PAX forms package to be used for any transaction or TranCode that uses a PAX device.
  • For the latest PAX forms package, the STR.AMOUNT_TEXT variable is cleared when displaying the "swipe screen".
Microsoft Windows 11 Pro / 10 Pro / Server 2019 / Server 2016

OR

DSIClientX® 3.86
Download

Release date: 09/01/2011

Datacap’s long-standing in-scope ActiveX control for NETePay and GIFTePay software.

Microsoft Windows 11 Pro / 10 Pro / Server 2019 / Server 2016
Step 2 - Install Administrative tools (optional)
Local Batch Report Viewer
Download User Guide

Release date: 05/11/2020

Local Batch Report Viewer can be used to view the locally stored batch report of Host based NETePay who support support this feature and have it enabled via PSCS.

Release notes for v1.03

  • Fix for an issue which prevented errors from the open batch being shown in the decline/error tab.
Microsoft Windows 11 Pro / 10 Pro / Server 2019 / Server 2016
Step 3 - Install NETePay EVO US EMV (FD-RC) Host - RRH 5.07.35 Rental
Install
NETePay 5
Director

OR

Download User Guide

This NETePay is available via the NETePay 5 Director which provides a simplified installation process and go-forward automatic software updates. NETePay 5 Director is recommended but if needed the classic installation process is still available by clicking Download as usual.

To learn more about the NETePay 5 Director click here.

Release date: 12/10/2019

  • An EMV card brand certification was completed for Ingenico Tetra devices. These include the Lane/3000, 5000, 7000 and 8000. It also includes the Move/3500, Move/5000 and Link/2500. The latest client controls (dsiPDCX and dsiEMVUS) support these devices with clear card data, with Ingenico TDES DUKPT PAN encryption and with Ingenico OnGuard PAN encryption.
  • EMV Support is added for China Union Pay.
  • Telechek “Echeck” regression testing was completed as part of this release.
  • First Data’s Validated P2PE is supported using Ingenico’s OnGuard PAN encryption. This NETePay supports a new parameter to control support for Ingenico devices enabled for OnGuard. NETePay will not allow transactions with OnGuard encryption to be processed unless “TransArmor Validated P2PE using Ingenico OnGuard” is enabled at PSCS/NETePay.
  • For EBT eWIC transactions, when an eWIC Discount is provided, NETePay no longer adjusts the authorize amount.

New build released 1/27/20 - Fix for PartialReversalByRecordNo to maintain all of the AcqRefData fields. This resolves an issue where PreAuthCaptureByRecordNo can fail after performing a PartialReversalByRecordNo.

New build released 7/24/20 - A Mastercard PreAuth can return a new response field in the MCGrp called TranIntgClass. When this field is returned, we are now sending it on the Capture/Completion.

New build released 12/21/20 - Change to POSEntryMode sent on IncrementalAuth.

Microsoft Windows 11 Pro / 10 Pro / Server 2019 / Server 2016